Q32編輪胎式拋丸清掃機

◆類產品優點 Product features

本輪胎式通過式拋丸機適用于多明細，大中文件批量產量產品工件的的外壁除銹處理或拋丸強化裝備，清除垃圾產品工件的一定就是不怕正碰的單重在150kg下述的鑄件及熱處置件，機用戶既可單機手游運用，又可配線運用. 應屬煅造機械裝備標準。

智能式：將鋁件倒入橡塑履帶滾桶中，基本操作人按下面公式“行駛”快捷，拋丸室門手動關閉程序，拋丸保養來進行，履帶前行行駛，鋁件連續不停地來進行翻滾，全力拋丸器將拋丸快速拋噴到正翻滾的鋁件漆層上，鋁件可全均勻分布地實現保養。鋼丸依據履帶電池的溜孔涌入回旋傳輸機，再將鋼丸傳輸到斗式完善機，經斗式完善機完善到剝離 器，被剝離 后儲存備用。拋丸結束了之后，拋丸室門智能式取消，履帶轉變，將鋁件卸出。

人工手動開啟機組：這手機是采取髙速倒轉的風葉將彈丸拋向履帶內間斷旋轉的鏜孔的上，因而實現清潔鏜孔的的必要性。它選用在金融業業中的超小型鑄件、鍛件、模具沖壓件、傘齒輪、氣彈簧等件的清砂、除銹方法、去被氧化皮和從表面強化木紋地板。超聲波焊接機是綜合性中國大陸外技能，設計聯合開發的新品牌，是一個種清潔有效率好、格局緊湊型、低頻噪音小、一整套的性好的清潔專用設備。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆產品特征 Product features

1.機器用于了懸臂離心力式拋丸器，具備著適用期長和型式簡略等基本特征。

2.通過BE型轉移器，包括健康的轉移效率和生孩子率，對提升 葉子有積極行動的目的。

3.用到袋式安裝除塵設備器，粉塵密度排污密度高出地方的規定的的標準，大土地糾正了的操筆者的勞動者條件。

4.進行耐磨性塑料履帶，可減輕了對部件的觸碰及受損實際情況，有效降低了機器人的噪音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆適于的范圍 Applicable scope

      壓鑄件、細密鑄件、細密鍛件等的徹底清除、光飾。快速清理熱清理件、鑄件、鍛件的表層氧化反應皮。大彈簧的增幅。牢固件除銹清理和前清理。

1、基準傳統90年 末的通過式拋丸機開始國內生產的化生產加工。

2、采取直聯雙固拋丸器，轉遞質量好，拋丸量大。

3、風選提取器、丸砂提取率超出99%。

4、彈丸包括一致，無拋丸衛生死角。

5、抗刮件施用使用時間長，改換十分迅速。

6、儀器低背景噪聲正常運行。

7、電適用繼物品（或PLC）管理，管理柜、聲光控開關報警器器，PC利用了三菱數控系統加盟牌子，主要是原元器件利用了西門子系統全資加盟牌子運行簡短、信得過。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆主耍高參數表表 Main technical parameters