噴漆機械設備系列作品

STR-NKP-1型管壁內噴漆器  Spraying machine for piping inner wall

◆可用于范疇 Applicable scope

使用作小圓孔及中小型pvc排水管的側壁涂漆，它是采用無氣靜電噴涂機輸送帶來的各類高壓工業油漆，進行精制的噴口，使工業油漆霧化吸入后馬上形成了汽車喇叭形（園錐型、塊實心），均衡地噴在pvc排水管內從表面，而構建pvc排水管的涂漆。 NKP-1型主要的適宜于Ф50-Ф300mm的管網，外墻乳膠漆粘合度嚴禁優于80秒（4號福特杯）。但如果金屬涂料107硅橡膠粘度高過80秒，需要溶液稀釋溶液。NKP-1型一般上易受輸送管道間距限止，但較好不長而15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

配置方框圖 Installation to which